IMPORTANT NOTES - Please Read / Action:  

• Failure to enter the correct PIN 10 consecutive times will automatically delete the contents of the drive.
• Datasite will retain a record of the original PIN assigned to the device. If you choose to change the PIN we will be unable to retrieve it for you. 
• Please ensure the device is not plugged into the USB port when performing the below steps. 

To unlock the device please carefully follow the instructions below:

  1   Press the GREEN button on the device to wake. The RED LED will glow solidly.

  2   Within 10 seconds, enter the PIN provided. Press the GREEN button.

  3   If the PIN is accepted, the GREEN LED will blink quickly four times. It will continue to blink slowly until the device is plugged into a USB port, after which the light will glow solidly; If the PIN is incorrect, the RED LED will blink three times before glowing solidly.

  4   With the correct PIN, connect the drive to a USB port within 30 seconds.

  5   To lock the USB drive, press the RED button.

If you have any questions or concerns accessing your media, please do not hesitate to contact us.

Go back to the Datasite media user guide.